security walk through metal detector PD6500I

1.Multi-zone :33zones
2.Weatherproofing
Foreign Object Protection Standards
Usage:Security door

            GARRETT PD 6500i  perfect double security door
USER MANUAL
MANUFACTURER CAUTION
Read Thoroughly Before Operating
CAUTION! Use of this equipment in a manner not specified by the manufacturer may
result in damage to property or injury to persons.
Electrical: 100 - 240 V~ +10% - -15%
1.0 - 0.5A
50/60 Hz
Installation Category: II
Pollution Degree: 2
Maximum Relative Humidity: 95% non-condensing
Operating Temperature: -4ºF (-20ºC) to +158ºF (70ºC)
Maximum Altitude: 3000 meters
Place the PD 6500i in an area where it is protected from direct rain, mist and / or
condensation and position it on a level, stable floor free from vibration.
CAUTION! PD 6500i may be firmly anchored to the floor or optional stabilizer base
attached to reduce the risk of injury to persons or property damage due to accidental
knock down.
SYMBOLS:
Garrett Metal Detectors and garrett.com are trademarks and registered trademarks of
Garrett Electronics, Inc. If further assistance is required, please contact the factory using
contact information on front cover.

Specifications:

 1) Operating Temperatures

 -20°C to + 70°C; Humidity: To 95% non-condensing

2) Power Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; no rewiring, switching or adjustments required.

 3) Weatherproofing / Foreign Object Protection Standards

Meets IP 55, IEC Standard. "Degrees of Protection provided by Enclosures," IEC 529.

4) Tamper-Proof

All settings are secured with a key lock and two levels of access codes. Further security is accomplished with a cabinet lock which prevents unauthorized access to physical cables, connectors and electronics.

5) Control Outputs  

       Solid state switches (low voltage AC or DC) for operating external alarms and control devices.

6) Traffic Counter

       Counter tracks the number of patrons that have passed through the detector, the number of alarms and calculates alarm percentage.

7) Synchronization

       Dual channels and DSP circuitry allow several PD-6500i's to operate simultaneously in close proximity to one another.

8) Interference Suppression

       DSP built-in circuitry eliminates effects from x-ray monitors and other potential electrical interference sources.

9) Programmes

    Sixteen (16) independent programs designed to meet all installation-specific requirements including the new TSA Enhanced Metal Detector (EMD) System requirements for airports.

10) Alarms

       Audible tone and volume adjustable. Bright LED visual alarm

11) Target Pinpointing Lights

       Thirty-three distinct zones are displayed with two independent columns of LED's located on exit side of the gate.